forced induction roll call

[ben91]

Who's boosted and with what? Only looking to hear from folks who are currently boosted or who have already paid for hardware and are currently in midst install. If you're thinking of downstream forced induction goodness, I'm happy for you, but don't want to hear from you at this time.

I'll start.

99AE 6spd 3.90 TorsenII
Bell Stage 4 turbo with Garrett GT2560r, Xede, and Racing Beat exhaust

[Roadster]

-1991 BRG
-Jackson MP45 (adapted belt routing and pulleys to no PS or AC), Jackson header and AFPR, Bipes ACU, Olderguy o2 clamp, 2.5 in catback to center exit w/Flowmaster 40.

[wildfire0310]

Well thanks to all your help, I am now.

91 BRG with a 1.8swap (99 bottom with 95 head)
hybrid 5spd with 4:30 VLSD
FMIII manifold, T25, Tial wastegate(5psi)
FMU and open exhaust.

[blk95r]

'95 R package, no A/C, BEGi-S kit with Garrett GT2860RS, stainless steel seperated gas downpipe, Spec stage 2 clutch, Spec aluminum flywheel, factory torsen, test pipe, Enthuza 2 1/2" to 3" stainless exhaust (all one piece). Non intercooled, only running 7psi right now. Have sitting in my garage an LC-1 wideband, and Megasquirt '94-'95 PNP setup. Need to rebuild engine, add bigger injectors and intercooler before that stuff goes on. My car burns just a *little* oil.

[nickt93]

My car is a 95 with an FMII kit - Link ECU.

Just finished the install in December (but of course you already know that Ben - you were here 'til 5am getting it running!)

[RotorNutFD3S]

Thanks for leaving the roll call open for those of us who are still trying to get it together... :lol:

'95 "R" Package
Mildly Built Block (Forged CAT Rods, Tri-Coated OEM Pistons, ARP Main/Head Studs, MBSP, & MSM Oil Pan)
BP4W Head Swap, Mildly Ported, Blended, Supertech OEM-Sized Valves, Viton Valve Seals
BEGi Directed Pulse Manifold & Divorced Gases Downpipe
Garrett GT2871R
Enthuza 3" Dual Exhaust and 3" Metal Core Cat
6-Speed Transmission Swap
ACT Extreme Clutch and FM/Fidanza Lightweight Flywheel
Cusco 1.5 Way LSD w/ CryoREM'd 3.636 Gears
Link EMS w/ AEM UEGO
RC Engineering 550cc Injectors w/ M-Tuned Large Bore Dual Feed Rail
Devil's Own Progressive Methanol Injection System

[ben91]

Eric, which 2871r did you pick up?

[metalman]

I have all the parts....FM2 GT2560r, Link EMS, RC440s, Tial BOV, Vishnu rail, FM hybrid stainless downpipe, FM 10 lb flywheel, ACT clutch, yada yada....just need a clear garage to bolt them on. Too many cars in the way right now.

[N3v]

get on it kurt, make that NA more than just pretty.

[RotorNutFD3S]

Eric, which 2871r did you pick up?

I found a brand new one on eBay a while back for an amazing deal because the guy had no idea what he had, I searched it using the Garrett tag serial #. :D
It was brand new, in the Garrett box, just perfect. Even has the cast-in divider that comes with some of the turbos, so BEGi just welded in a little tab to complete the divide.

[ben91]

I found a brand new one on eBay a while back for an amazing deal because the guy had no idea what he had, I searched it using the Garrett tag serial #. :D
It was brand new, in the Garrett box, just perfect. Even had the cast-in divider that comes with some of the turbos, so BEGi just welded in a little tab to complete the divide.

Well that's pretty awesome but I meant which version did you get? There's about half a dozen different 2871 combos. I know you didn't get an external gated one or a T3 flange, but there's still a few possibilities.

[darknessprevails]

1990 red na
begi s3 gt60 custom open pipe exhs,stainless steel seperated gas downpipe megasquirt comp ls-1 wideband .
all i can think of atm no fuel inj or pump yet mild tune only running 6-8 psi till i buy the rest. only been on a few weeks.

[redrumracer]

1990 red na
begi s3 gt60 custom open pipe exhs,stainless steel seperated gas downpipe megasquirt comp ls-1 wideband .
all i can think of atm no fuel inj or pump yet mild tune only running 6-8 psi till i buy the rest. only been on a few weeks.

a gt60

[RotorNutFD3S]

Well that's pretty awesome but I meant which version did you get? There's about half a dozen different 2871 combos. I know you didn't get an external gated one or a T3 flange, but there's still a few possibilities.

Oh, sorry. I just remembered us talking about the few for sale a while back and swapping turbine housings and such... But yeah, T25 flanged, 56 trim .60 a/r compressor, standard 76 trim .64 a/r turbine.

[Doppelgänger]

02 w/FMII @13 psi

stock block w/10:1 compression
stock 6-spd transmission
stock 3.909 TorSen LSD

2506rs water and oil cooled
Hydra Nemesis Standalone ECU
RC 550 injectors
FM cast shorty-tubular-ish manifold
FM silicone charge pipes
Turbo XS RFL bov
FM 2.5" Turbo-back exhaust
28x8x3" FM intercooler
FM Happy Meal clutch/flywheel

250rwhp/211rwtq.......for now.