Results 1 to 4 of 4

Thread: Bearings and hubs

  1. #1
    Join Date
    Jul 2017
    Location
    Dacula
    Posts
    5

    Default Bearings and hubs

    For NC Miatas I have seen that the 09 and up RX8 is a beefier unit. Some RX8 hub retailers say with and with out dynamic stability control. So what one goes in the 08 mx5? Anyone?
    Last edited by Wifes-Mechanic; 07-25-2017 at 08:48 AM.

  2. #2
    Join Date
    Jul 2010
    Location
    Duluth
    Posts
    532

    Default

    What trim is your NC, grand touring or something else?

    The RX8 front hubs are plug and play. The rears are not without messing with axles.
    2007 True Red Miata

  3. #3
    Join Date
    Jul 2017
    Location
    Dacula
    Posts
    5

    Default

    it's a Sport, will a hub that's for a 09 RX8 with out Dynamic stability Control work?

  4. #4
    Join Date
    Jul 2010
    Location
    Duluth
    Posts
    532

    Default

    Yes, this is the exact part that you'll need, x2. I run the same on my car.

    http://www.rockauto.com/en/moreinfo....23&jsn=3&jsn=3
    2007 True Red Miata

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •