MX5 Miata Atlanta Owners Club http://www.mx5atlanta.com/forums/ en Tue, 18 Jun 2013 05:52:01 GMT vBulletin 60 http://www.mx5atlanta.com/forums/images/misc/rss.png MX5 Miata Atlanta Owners Club http://www.mx5atlanta.com/forums/ <![CDATA[[For Sale] [NA+NB] MSM turbo kit and full 2.5 exhaust, NB2 Steering wheel]]> http://www.mx5atlanta.com/forums/showthread.php?20975-MSM-turbo-kit-and-full-2-5-exhaust-NB2-Steering-wheel&goto=newpost Tue, 18 Jun 2013 02:44:22 GMT For your consideration is my collection of MSM, Flyin miata, and Enthuza parts. This kit is nearly complete. You would only need some manner of... For your consideration is my collection of MSM, Flyin miata, and Enthuza parts. This kit is nearly complete. You would only need some manner of timing control, EGR pipe, a boost gauge, wideband, and a few clamps and odds and ends to get running. You should also probably get a $50 ebay intercooler, but everything else is here, and the hard to find parts are all included. Everything is in good condition, except the air filter, which has a dent in it.

Contents of the kit are as follows.

1. MSM turbo and manifold. There is a stainless line drain attached to it currently, and an EBay wastegate outlet. I have included the OEM ones as well.

2. Full OEM intercooler piping minus OEM airbox, with Flyin miata throttle body pipe.

3. MSM specific water pump inlet and tube to heater core for water line from turbo

4. MSM specific oil pan and drain line.

5. FM voodoo box engine management. Timing wheel needed for NB, for 1.8 NA, Bipes.

6. Unknown origin, steel body recirculating BOV. Use it or dont, but its included.

7. Full 2.5 inch exhaust comprised of Flyin miata MSM downpipe, Enthuza midpipe, and Enthuza XR turbo. nice stuff. An ebay downpipe is included for those who would like to go sans cat.

Im asking $1400, cash. I think its a pretty cheap route to 200hp, and am sad to see it go, but if it doesnt sell after a while Ill consider parting it out. Willing to deliver to reasonable distance. Not looking for trades, but you can always ask. worst I can say is no.





Also, an OEM NB2 steering wheel in good condition. one side airbag bolt absent. Not a big deal, but worth mentioning. $100



Also also, an NB windblocker. Just come and get this GD thing.




Thanks guys. ]]> Animus21 http://www.mx5atlanta.com/forums/showthread.php?20975-MSM-turbo-kit-and-full-2-5-exhaust-NB2-Steering-wheel 1991 Miata Part Out Lot (Suwanee) $700 http://www.mx5atlanta.com/forums/showthread.php?20974-1991-Miata-Part-Out-Lot-(Suwanee)-700&goto=newpost Tue, 18 Jun 2013 00:50:44 GMT *These are not my adverts, these are links found on craigslist and posted up on here by my bot account. If you want to find out more info be sure to... These are not my adverts, these are links found on craigslist and posted up on here by my bot account. If you want to find out more info be sure to click on the "More..." link below. Thanks!

In an attempt to clear out my garage so I can continue on with my project, I'm offering all the parts I've pulled thus far as a lot for $700. There is approx. $1200 worth of parts available for for resale if you have the space available to store them [...]

More... ]]> Craigslist Bot Findings! JDM88 http://www.mx5atlanta.com/forums/showthread.php?20974-1991-Miata-Part-Out-Lot-(Suwanee)-700 Not bad http://www.mx5atlanta.com/forums/showthread.php?20973-Not-bad&goto=newpost Tue, 18 Jun 2013 00:26:15 GMT http://miami.craigslist.org/pbc/cto/3814000493.html I really should have bought Bob's car. ]]> Hot Links Theo http://www.mx5atlanta.com/forums/showthread.php?20973-Not-bad <![CDATA[[For Sale] [NB] Hand full of parts]]> http://www.mx5atlanta.com/forums/showthread.php?20972-Hand-full-of-parts&goto=newpost Mon, 17 Jun 2013 19:08:37 GMT I have a soft top frame with the top I had on it ($100) Stock nb shocks and springs ($30) Stock nb Beige passenger seat with oem sliders ($90)... I have a soft top frame with the top I had on it ($100)

Stock nb shocks and springs ($30)

Stock nb Beige passenger seat with oem sliders ($90)

1.8 fidenza lightweight flywheel ($280)

nb oem fuel filter ($20) ]]> Kidmotor http://www.mx5atlanta.com/forums/showthread.php?20972-Hand-full-of-parts <![CDATA[[For Sale] Sig Sauer P229]]> http://www.mx5atlanta.com/forums/showthread.php?20971-Sig-Sauer-P229&goto=newpost Mon, 17 Jun 2013 18:59:57 GMT Don't want to, But I need money so I am selling my sig. Its a p229 with nightsights and a front rail, I have put around 800 rounds through it with 0 jams, and have taken meticulous care of it. It comes with 2 12 round mags. Im asking 800 for it. photo (2).jpgphoto.jpg
Attached Images
]]> Kidmotor http://www.mx5atlanta.com/forums/showthread.php?20971-Sig-Sauer-P229 1990-1997 Miata Torsen Diff, Other Parts (Marietta/East Cobb) $10 http://www.mx5atlanta.com/forums/showthread.php?20970-1990-1997-Miata-Torsen-Diff-Other-Parts-(Marietta-East-Cobb)-10&goto=newpost Mon, 17 Jun 2013 18:41:13 GMT *These are not my adverts, these are links found on craigslist and posted up on here by my bot account. If you want to find out more info be sure to... These are not my adverts, these are links found on craigslist and posted up on here by my bot account. If you want to find out more info be sure to click on the "More..." link below. Thanks!

These are remaining parts from a 1994 "C" Package Mazda Miata. The car was parted out 3 years ago, and I held onto these parts for a project that never came to be.The car had 160k miles on it before it was parted out. Everything ran fine until it wa [...]

More... ]]> Craigslist Bot Findings! JDM88 http://www.mx5atlanta.com/forums/showthread.php?20970-1990-1997-Miata-Torsen-Diff-Other-Parts-(Marietta-East-Cobb)-10 battery recommendations? http://www.mx5atlanta.com/forums/showthread.php?20969-battery-recommendations&goto=newpost Mon, 17 Jun 2013 13:58:21 GMT Putting a plan to get my Miata back on the road.. My current optima is heavy, nearly dead and expensive. I'm thinking about the pc680, would that be too small for a street car that will be driven once a month or so and an occasional road trip? ]]> Miata Talk Stealth97 http://www.mx5atlanta.com/forums/showthread.php?20969-battery-recommendations Track dat ltgp June 24th http://www.mx5atlanta.com/forums/showthread.php?20968-Track-dat-ltgp-June-24th&goto=newpost Mon, 17 Jun 2013 01:41:50 GMT We have a few more spots at $175 each. This is a small group with a total of 12 drivers so there will be more track time than you can handle. Pm... We have a few more spots at $175 each. This is a small group with a total of 12 drivers so there will be more track time than you can handle.

Pm me for more info. ]]> Racing scareyourpassenger http://www.mx5atlanta.com/forums/showthread.php?20968-Track-dat-ltgp-June-24th Reccomend a Tuner? http://www.mx5atlanta.com/forums/showthread.php?20967-Reccomend-a-Tuner&goto=newpost Mon, 17 Jun 2013 00:24:51 GMT I think it is time to pay someone who will do a good job tuning our Piggyback Link in the 2002 Miata. Does anyone have recommendations? We hang out... I think it is time to pay someone who will do a good job tuning our Piggyback Link in the 2002 Miata.
Does anyone have recommendations?
We hang out in Alpharetta.

Thank you ]]> Miata Modifications Fossil http://www.mx5atlanta.com/forums/showthread.php?20967-Reccomend-a-Tuner Racing Seat http://www.mx5atlanta.com/forums/showthread.php?20966-Racing-Seat&goto=newpost Sun, 16 Jun 2013 21:32:19 GMT I picked up the passenger corbeau seat from iamdallas (thanks again) now I've got to make a decision on a drivers seat. I'm a 32in waist and a short guy at around 5'7". I've been eyeing the replica brides seats that batlground in Smyrna sells. But when I called them about stopping by for a test fit I found out they only stay open till 6, with me getting off a 5 and driving from cumming to the shop isn't going to work. Is there anyone who has the Vios iii or another seat that might fit me for me to sit in and see if I like the fit? ]]> Miata Modifications Xcbomber http://www.mx5atlanta.com/forums/showthread.php?20966-Racing-Seat <![CDATA[Mazda Miata NC Alloy Wheels & Tires 4x100 205/50/16 (Atlanta) $600]]> http://www.mx5atlanta.com/forums/showthread.php?20965-Mazda-Miata-NC-Alloy-Wheels-amp-Tires-4x100-205-50-16-(Atlanta)-600&goto=newpost Sun, 16 Jun 2013 19:31:29 GMT *These are not my adverts, these are links found on craigslist and posted up on here by my bot account. If you want to find out more info be sure to... These are not my adverts, these are links found on craigslist and posted up on here by my bot account. If you want to find out more info be sure to click on the "More..." link below. Thanks!

FOR SALE $600 OBO - Seriously, make me an offer and we can talk. 4 Mazda Miata NC (2001-2003) Alloy 16" X 6.5" 4x100 wheels -Each wheel has some degree of rash/flaking. I've shown some of the damage in the pictures. -Comes with all 4 center caps [...]

More... ]]> Craigslist Bot Findings! JDM88 http://www.mx5atlanta.com/forums/showthread.php?20965-Mazda-Miata-NC-Alloy-Wheels-amp-Tires-4x100-205-50-16-(Atlanta)-600 Megasquirt CAN Bus Arduino http://www.mx5atlanta.com/forums/showthread.php?20964-Megasquirt-CAN-Bus-Arduino&goto=newpost Sun, 16 Jun 2013 18:54:38 GMT I've been fighting with this for over a week and I *finally* got it to do the thing so pardon me while I gloat a little.

Arduino UNO + Sparkfun/SKPang CAN shield + Adafruit OLED screen. I've seen people do similar - or attempt to - but never posted the code. And I had plenty of obstacles and learning the MCP2515 datasheet. And this is kinda sorta a prototype for whats going into my blank oil pressure gauge location ( https://lh6.googleusercontent.com/-8...127_025734.jpg ) But.. yeah.



Now onto populating the rest of the variables and figuring out the best way to attack the menu system, and making the var_offset/var_blk code less hackish. ]]> Miata Modifications iscariot http://www.mx5atlanta.com/forums/showthread.php?20964-Megasquirt-CAN-Bus-Arduino <![CDATA[Happy Father's Day]]> http://www.mx5atlanta.com/forums/showthread.php?20963-Happy-Father-s-Day&goto=newpost Sun, 16 Jun 2013 12:31:54 GMT I just wanted to wish all the dads on the forum a Happy Father's Day. Plus it might help remind someone to wish their dad a happy father's day lol. ]]> Off-Topic miata5620 http://www.mx5atlanta.com/forums/showthread.php?20963-Happy-Father-s-Day Lowered alignment problem. http://www.mx5atlanta.com/forums/showthread.php?20961-Lowered-alignment-problem&goto=newpost Sun, 16 Jun 2013 04:54:57 GMT So I've had my car at it's current ride height for a while. It's not insanely low, but it's certainly not stock. I have stock hollow 7 spokes with 195's on em. I have vmaxx coilovers and had an alignment done, including the shop setting ride height with me in it.

But on to the problem... I was driving with a friend, a particularly large friend(I must disclose I'm not exactly small either) and wet to make a lefthand u-turn. Heard an interesting rubbing noise on the front right. When I pull off of the road I got out, had a look around and found that my front right wheel had a lot of toe-out with my steering wheel centered. My question is, what exactly caused this(yes I know being lowered and rubbing, but which piece would have moved?) and what can I do to properly fix it? ]]> Troubleshooting harrybeachdog http://www.mx5atlanta.com/forums/showthread.php?20961-Lowered-alignment-problem <![CDATA[[Wanted] WTB - 99-00 Miata OEM Front Lower Lip]]> http://www.mx5atlanta.com/forums/showthread.php?20960-WTB-99-00-Miata-OEM-Front-Lower-Lip&goto=newpost Sun, 16 Jun 2013 00:52:57 GMT I need a 1999 or 2000 OEM Miata front lower lip. I am restoring/repairing a 2000 Evolution Orange LS and am almost ready to repaint the car. If... I need a 1999 or 2000 OEM Miata front lower lip. I am restoring/repairing a 2000 Evolution Orange LS and am almost ready to repaint the car.

If you have one available, please let me know at four zero four 694 Nine six Three six.

Check out mostlymiata.net for pictures of the repairs that have already been made.

Charlie ]]> 2busy2work http://www.mx5atlanta.com/forums/showthread.php?20960-WTB-99-00-Miata-OEM-Front-Lower-Lip