'95 valve springs

[Stealth97]

Looking for a pair of the stiffer '95 valve springs, as I'm two short of a full set :) If you have a set you dont want to part I understand, just send me a PM. Thanks!

[mustangtomiata]

I have the '95 motor out of my car if that interests you.

[Stealth97]

I'd like a spare motor but I just don't have the room. If you do part that motor out let ne know though.

[metalman]

I have a 95 1.8 cyl head assy if that interests you.

[FE3tMX5]

You might hit up Steve @ Panic since they're in the racing biz. OPM too... and Mr. Luney...

[DecoyOctopus]

Looking for a pair of the stiffer '95 valve springs, as I'm two short of a full set :) If you have a set you dont want to part I understand, just send me a PM. Thanks!

hey im assuming you have the correct valve spring compressor to install those? mind sharing where u got it?

[Stealth97]

No I don't have the compressor. Sorry man.

[FE3tMX5]

I've used several different spring compressors on Miata heads. None of them were special except for the fact they're design for overhead cam engines.

[DecoyOctopus]

I've used several different spring compressors on Miata heads. None of them were special except for the fact they're design for overhead cam engines.

ive tried 2 different ones designed for ohc engines. the little thing that presses the spring down was too big to fit down the hole. where can i find one that works?

[FE3tMX5]

Ahhh- Ok. You need to fab up an adapter to the Miata's lifter bore using some pvc. I think it's 1" pvc that works. Cut a stick about 3-4 inches long and then cut out a C shape in the wall so you can grab the keepers with a magnet.