Wideband Question

[Dr.Drew]

So on my WB I have four loose wires coming off the harness, red-power, black-ground, white-0 to 5v output, and blue-serial. Which of these will I need to connect to my megasquirt? If I'm installing the gauge before the ecu should I just solder in more wire to one of these to make it easier to interface with the ecu?

[Jack-MX5ATLanta.com]

Moved*

[wonton]

drew! ill tell you when i pull the ecu! :D

[Matt Cramer]

Connect the white wire to the MS.

[Dr.Drew]

drew! ill tell you when i pull the ecu! :D

I'm going to install the gauges not so there's one less thing to do when we install the rest :D. So I wanted to make sure I didn't do anything stupid in the process.

Thanks for the info guys