WTB- front O2 sensor

[Doppelgänger]

Yeah, having some issues with mine so i'm pretty sure it's toast. IIRC all front NBO2 for 99-05 are the same (different in harness length makes for different part numbers, but sensor itself is the same). So who has one? :)

[ben91]

All sensors are the same, the connectors are the same. You are correct, the only difference is the length of the harness.

You can also go get a new 4-wire generic at the parts store for mad cheap and wire it in.

[Doppelgänger]

I'd imagine that someone on here has one cheaper and won't require the boring work of splicing...i'm too lazy to want to do that. Rmember the one we had to replace on Jenn's car was $75 dollars? Yeah, i'm not going to spend that right now.

[miatamike]

i used a subi STI o2 cuz its a little nicer then most im also told it holds up to heat better and it has a shield on the out side to reflect heat. but all 4 wire o2 are the same only need to make sure its a before cat sensor. ill see if i can pull up the site that gives you the color code for each sensor company.

[ben91]

Yeah I thought that $75 was ridiculous too. If you can't find what you need second hand, there is a $30-40 bosch universal upstream sensor. It's easier to wire in than the rear because the front sensor harness is easier to remove from the car, so you can solder and shrink it on a table.

Also I guess this means you're not running the wideband? I thought you had a working solution?

[miatastuff]

I have several used ones. E-mail me or give me a call. I am free after church today.

[Doppelgänger]

Thanks David! I'll get it in tomorrow and we'll see this week if it's my problem (fingers crossed). BTW PP sent :)