Need a part?? (part 2)

[metalman]

Parts.....parts...parts....

[metalman]

Hoods, NA & NB, downpipes for 90-05, 99-00 manifold, window glass, bulhead panels (including one trimmed for roll bar) driveshafts...
[attachment=271]
[attachment=272]
[attachment=273]
[attachment=274]
[attachment=275]

[metalman]

Heater cores, seat sliders, decklids, transmission, & engine parts....

[attachment=276]
[attachment=277]
[attachment=278]
[attachment=279]
[attachment=280]

[metalman]

PPF (for Doppelganger :lol:), wheels, undertray, conv. top boot, & ecu...

[attachment=281]
[attachment=282]
[attachment=283]
[attachment=284]
[attachment=285]

[metalman]

Finish panel, Nardi wheel/airbag, seatbelts for NB, brake booster/master, visors for NA & NB....have split type too.

[attachment=286]
[attachment=287]
[attachment=288]
[attachment=289]
[attachment=290]

[metalman]

In fact...I have a complete running parts car. :lol:

[jesseealexander]

lol @ that last post...

dont you have anything better to do old man? isnt it bingo night or something? :lol::lol:

[MoD_Scotty]

OH SNAP! What kind of condition is the Nardi wheel in? And how much for it?

[Jack-MX5ATLanta.com]

lol @ that last post...

dont you have anything better to do old man? isnt it bingo night or something? :lol::lol:


:lol::lol: :lol:

[metalman]

dont you have anything better to do old man? isnt it bingo night or something? :lol::lol:


Who called you in off the swingset? Get off your mommy's computer. :D

[metalman]

Oh...and the white car IS going to get parted. :cool:

[jesseealexander]

Oh...and the white car IS going to get parted. :cool:




that sucks. not for you, though. haha

would you sell it outright? i might be able to find someone whos interested.

[metalman]

would you sell it outright?

No. Cant sell this one. It will be parted.

[GraffitiPanda]

HOOD, TRUNK, HEADLIGHT COVERS GIMMEEEE PRIIIICE!

oh and i need a tie rod end...

And my horns!

ill talk at ya Thursday...

[mustangtomiata]

I have officially bought something from Kurt, coil pack, puttin it on tomorrow or Monday.

[nderwater]

what year is the trans?

[metalman]

what year is the trans?


Its from an NA, 91 or 2 as I recall.

[Jack-MX5ATLanta.com]

how much for a 1.8 valve cover?

[PopPop REVS 9k]

Do you have a NA front drivers side fender? Maybe in red?

[MAC-G35]

Do you have any cam angle sensors? If so, are they in good working condition and how much would you take?
Brian

[ben91]

Brian, you should list what year cam sensor you need. They are 90-93, 94-97, and 99-05. Also 96-05 have both cam and crank sensors.
If you're adding a standalone to the car, then I prefer the early optical style CAS, but they're starting to fail :(

[ben91]

K-Man,
I might need (1) frankenstein bolt. I'm sure you can come up with that. Maybe hardtop side strikers too, depending on how the hardtop fits with the non-hardtop version rollbar. I'll see, might not be able to use side strikers at all. I know those are kind of hard to find on a used car though.

Oh, and a 99 owner's book might be nice to have if you have one.

:)

[metalman]

Frankenbolt I should have.
Will look through my owners manuals and see if I have a 99 left.
I dont have side strikers...unless you can mod front strikers to work.

[metalman]

how much for a 1.8 valve cover?


Sorry, I dont have any 1.8 covers...all sold out

[metalman]

Do you have a NA front drivers side fender? Maybe in red?


I dont have a red fender...but I may have a used drivers fender shortly.

[metalman]

Do you have any cam angle sensors? If so, are they in good working condition and how much would you take?
Brian


I dont have any 1.8 CAS...I may have a 1.6 CAS.

[MAC-G35]

I dont have any 1.8 CAS...I may have a 1.6 CAS.

I do need a 1.6 for '90. Let me know if you do have one.
Thanks,
Brian

[amaff]

what year is the 'white' car? ;)


PS: Were you able to track down that spacer?

[metalman]

PS: Were you able to track down that spacer?

I dont seem to have one. The only crank gear stuff I have left seems to be
of the small nose variety...unless you need cam gears. :D

[Doppelgänger]

Might be interested in that hood... is it black?

[metalman]

Might be interested in that hood... is it black?

NB hood? I have a dark blue one....easily made black with a few cans of Rustoleum satin black. :D

[Doppelgänger]

eh, im not quote that ghetto lol. it were black, i could just leave it glossy for what I want to do. Oh well.

[RotorNutFD3S]

eh, im not quote that ghetto lol. it were black, i could just leave it glossy for what I want to do. Oh well.

Stick on carbon fiber?

[metalman]

Your old friends at Mazmart may have a black one...just bring your bank account & first born child for down payment. If I were you I'd pick up a couple spare PPFs while youre at it too. LOL.... :D ;)

[metalman]

Stick on carbon fiber?

Excellent idea!!!! :D

[Doppelgänger]

lol... nah, i want to get an extra one and have it vented/louvered (if i can find a place to stamp it) for track days. I figure a shiny black hood wouldn't looks as cheap as some other color or one that's spray painted.

[ben91]

Mike, you need a BEGi or similar under radiator scooper. For serial.

[Doppelgänger]

won't work with the GV bumper and i'm planning on a rather large splitter for the font of the car.

[ben91]

Since when are you having cooling issues on the street? Run it on track days with your stock bumper.

[Doppelgänger]

not really having cooling issues.. but i want to reduce underhood temps/radiant heat by the turbo and i need the splitter for downforce on the front of the car..... to go with the eventual wing that will be on the back (using a spare trunk lif of course)

[mustangtomiata]

how much do you want for that hood?

[FlipKing]

Do you have the black trim off the passenger side door. the trim that is up by the window?

[metalman]

Do you have the black trim off the passenger side door. the trim that is up by the window?

Inside or outside? I should have either.

[FlipKing]

the outside one. connects either end of the door. I got rust forming b-c my trim dry rotted.

[JEMERY]

Some tag light housing's for 99-05?

[metalman]

Some tag light housing's for 99-05?

Are we talking the lights underneath the edge of the decklid?

[JEMERY]

Yes Sir, they are slide locking.

[Tinman88]

Driver's side manual window regulator?

[metalman]

Driver's side manual window regulator?

I should have one. Will PM you after confirming so.

[metalman]

Yes Sir, they are slide locking.

PM sent

[RotorNutFD3S]

Kurt, need to know tonight if possible if you have a clutch slave cylinder (going on a '96 5-speed if it matters) that we can get tomorrow. If you do, he'll drive his car.

[ben91]

all 90.5-2005 slave cylinders are the same, for what that's worth
the internal parts should all be the same from 90+

If Kurt doesn't have a slave, I'd be positive that you can pick up a rebuild kit tomorrow no problem.

[RotorNutFD3S]

I thought so since the transmissions were all similar.

Is there a Mazda dealer up there somewhere?

[ben91]

There's dealers all over. Rick Case is by Gwinnett Place Mall.

And parts stores too. It doesn't have to come from Mazda.


Make sure you ask for the slave cylinder "Internal Parts Kit" because that's how Mazda lists it and the guy at the parts counter probably won't know that a rebuild kit exists. They prefer to sell the whole $70 cylinder instead of the $17 parts kit.

[RotorNutFD3S]

Ah. Ok. I usually like OEM when it comes to parts like this, but if a parts store one is good enough, that's cool. I'll see if Kurt has one anyway just because we'll be there possibly picking up that softtop anyway.

[ben91]

The OEM slave sucks too. :dunno:

[RotorNutFD3S]

:lol: Just can't win sometimes...

[silver280zx]

Slave cylinders shouldnt be that expensive. When my z's slave cylinder went out, i took a trip to autozone, lol, and got one for like 10 bucks brand new with a lifetime warrenty.

[metalman]

I have a mazda rebuild kit for the slave cylinder, brand new in the package.
I should have a used cylinder too....so whichever you prefer.

[RotorNutFD3S]

Cool. Thanks man. See you in the morning.

[amaff]

Edit: I was wrong. Looks like Mazda quality control isn't what it should be on 'new' parts. Some casting flashing was on the bolt holes gumming them up. Cleaned that up and the bolts went right in..

[RotorNutFD3S]

Got any timing covers that aren't all cracked up and missing seals?

[metalman]

Got any timing covers that aren't all cracked up and missing seals?

I probably do. Have to look.

[RotorNutFD3S]

Cool. Please let me know!

[LagunaRoadster]

Fuse Block N008-66-730
Defroster Relay LA40-67-740
Timer Relay NA01-67-7T0
Defroster Pigtail N007-67-060A
I need these to make a defrost soft top work on my 92

[metalman]

Fuse Block N008-66-730
Defroster Relay LA40-67-740
Timer Relay NA01-67-7T0
Defroster Pigtail N007-67-060A
I need these to make a defrost soft top work on my 92

I should have the fuse block.
I dont have the other items.

[GraffitiPanda]

White hood white trunk white headlight covers. Ill pickm up tomorrow!

[metalman]

White hood white trunk white headlight covers. Ill pickm up tomorrow!

LOL good luck with that...as I dont have all of them. :D

I do have a white decklid.

[metalman]

Cool. Please let me know!

Okay...I do have some non cracked covers around. However, so far I dont see any with
good gaskets, as in the rubber seal around the edge.

[GraffitiPanda]

K whatever you got white ir black preferibly

[RotorNutFD3S]

Okay...I do have some non cracked covers around. However, so far I dont see any with
good gaskets, as in the rubber seal around the edge.

Drat. Only one of mine has a small crack, but the seals are shot. (I know people run without any covers all the time, but I prefer to have it as sealed up as possible.)

[metalman]

I'll look around a bit more...maybe I have more hiding somewhere.
Are all 1.6 & 1.8 timing covers the same? They look it.

[RotorNutFD3S]

You know, IDK. They might be, they probably are, I don't think anything changed on the front of the engines, just the length of the block from front to rear.

[LagunaRoadster]

I should have the fuse block.
I dont have the other items.

How much?

[amaff]

You wouldn't happen to have a good coil pack / bracket from a 1992/3 would you?

[metalman]

You wouldn't happen to have a good coil pack / bracket from a 1992/3 would you?

Yes I think I do.

[amaff]

Yes I think I do.

want to trade me your black hard top for a red one? :p

How much? I can pick it up from you from LL on Friday.

[Acro]

This is a completely random part request. I went to adjust my alternator belt today to find that the previous owner broke the slotted adjustment guide bar thingy(technical term) In half. Do you have one?

[metalman]

This is a completely random part request. I went to adjust my alternator belt today to find that the previous owner broke the slotted adjustment guide bar thingy(technical term) In half. Do you have one?

Okay...are we taking the bracket on top? (where your adjustment screw goes)
If so I have it..but not sure if I have the adjustment bolt.

[Acro]

Yep. The slotted bracket thing. Mine is broken in half O_O

This circled bit
http://img.photobucket.com/albums/v154/3eleven/Auto/alternator_bracket.jpg

[metalman]

Yeah I have that.

[Acro]

Yeah I have that.

How much ^..^

[metalman]

Cheap man...say $5..or a burger king whopper meal :)

[Acro]

Sweet :3 When can I get it?

[metalman]

Sweet :3 When can I get it?

LOL...you tell me. I am always around.

[Acro]

LOL...you tell me. I am always around.

Oh, okay. How about tomorrow after 12 sometime?

[metalman]

should work.
just call me.

[FlipKing]

Hey you, you never pm'd me.lol

[Acro]

should work.
just call me.

Alrighty. Will do.

[silver280zx]

http://i95.photobucket.com/albums/l153/924165385/Photo0434.jpg

Im not sure what this is yet, but its for my 91 na. The picture is taken from the passenger side, strut tower. I think its part of the emissions system. Do you have any idea what it is? and do you have any?
Thanks Kurt

[metalman]

On the left is the ignitor, part of the ignition.
On the right is the control valve (or some such) for the emissions system, it ties in with charcoal cannister as I recall.

I have both.

[silver280zx]

Could you pm me a price for the thing on the right. Ya it goes to the charchoal cannister, and has another line that goes to the throttlebody. Thanks

[amaff]

Kurt, I may be making a stop around your way tomorrow. I still need to pick up that combo switch from you to try and fix my high-beam issue. I'm also looking for the bolt for the A/C bracket that goes through the oil pump and block. Any chance you've got 1 laying around? LMK if you're available tomorrow morning and I'll swing by.

[metalman]

Kurt, I may be making a stop around your way tomorrow. I still need to pick up that combo switch from you to try and fix my high-beam issue. I'm also looking for the bolt for the A/C bracket that goes through the oil pump and block. Any chance you've got 1 laying around? LMK if you're available tomorrow morning and I'll swing by.

I should have that bolt...somewhere.

[MrVito]

PM me with a price for the Top boot if you still have it please :)

[amaff]

I should have that bolt...somewhere.

Actually, I lied. Can you bring them to the dinner tomorrow night? I'll swing by there and pick 'em up. PM me and let me know what I owe ya. Thanks!

[amaff]

Actually, I lied. Can you bring them to the dinner tomorrow night? I'll swing by there and pick 'em up. PM me and let me know what I owe ya. Thanks!

Yea or Nay? :p

[metalman]

Yea or Nay? :p

Yae or yay

[amaff]

Yae or yay

ok cool, I'll give you a call then.