2004 Mazdaspeed Engine [Archive] - MX5 Miata Atlanta Owners Club

PDA

View Full Version : 2004 Mazdaspeed Engine


PartsGroup
01-16-2009, 11:12 AM
Only 66,832 Miles. Excellent Compression & Leakdown!! Includes Longblock w/ Coil's,Alternator,Injectors,Intack & Exhaust Manifolds,Turbo,Downpipe,Flywheel,Injectors,Inject ion Harness,Fuel Rail,Etc. Great Upgrade For Early Miata's. First $1,700 Takes It.

metalman
01-16-2009, 11:16 AM
Ahh Parts Group is in the house. ;)
and in the wrong section if selling...hehehe

PartsGroup
01-16-2009, 11:19 AM
I thought that was you that was bidding that merlot up at copart. Glad to see it's in good hands with you! Someone will be getting great drive tran parts from that car. How's the BBS rims on the car? I have a customer looking for a set.

PartsGroup
01-16-2009, 11:21 AM
Sorry I posted this entry in the wrong section. Beginers mistake!

PartsGroup
01-16-2009, 11:23 AM
Here's a picture:

metalman
01-16-2009, 11:24 AM
Sorry I posted this entry in the wrong section. My first post and my first mistake.

:lol: I doubt anyone will get too pissed. I was just razzing you. ;)

Doppelgänger
01-16-2009, 11:29 AM
that's quite a smokin' deal for a complete engine!

Now, if you guys can get me a 02/03 titanium decklid....
I was looking at TPG website and there is a ton of stuff I want :lol:

RotorNutFD3S
01-16-2009, 11:36 AM
:lol: I doubt anyone will get too pissed.

Huh? We ban for less around here. I thought you knew that. :D

This is now your FS thread. ;)

PartsGroup
01-16-2009, 11:40 AM
I've got a 04 mazdaspeed titanium gray rear deck lid w/ spoiler available if interested.

Doppelgänger
01-16-2009, 11:49 AM
Yeah, I saw that, the paint is actually different between the 02/03 and the 04/05 MSM.... and I already have the MSM spoiler :D. I'm looking for a blank ti trunk (maybe even with a bit of damage from any year) for a track wing project.

PartsGroup
01-16-2009, 11:54 AM
I'll check around the shop to see if I have a beat up NB trunk lid. Does it have to be black?

MeFryRice
01-16-2009, 12:00 PM
Hey this is Steve, I believe I spoke to you a couple weeks ago about this motor. Now that's it's posted, it's very tempting.

jeff m
01-16-2009, 12:01 PM
Hmmm....I've been looking at that for a while. Does that included the complete wiring harness and ecu??

Doppelgänger
01-16-2009, 12:04 PM
blank..as in no spoiler ;) I'm looking for one in titanium..but not in prestine condition.

metalman
01-16-2009, 12:08 PM
blank..as in no spoiler ;) I'm looking for one in titanium..but not in prestine condition.

Why must it be titanium then?? Just curious.

Doppelgänger
01-16-2009, 12:14 PM
Because I do care about having a mostly matching (20/20 rule) decklid..and I don't want to pay to get it painted.

PartsGroup
01-16-2009, 12:15 PM
I can provide a complete harness & ecu from another mazdaspeed we are stripping today but the harness & ecu would be an additional cost.

Jack-MX5ATLanta.com
01-16-2009, 12:50 PM
Welcome, introduce yourself here:

http://www.mx5atlanta.com/forums/showthread.php?t=3

:)

simontibbett
01-16-2009, 05:15 PM
How difficult is this to swap into an NA?

wonton
01-16-2009, 06:22 PM
wish i had 1700 bucks laying around! that would be a awesome addition to my NA, hahaha

redrumracer
01-16-2009, 06:42 PM
that's quite a smokin' deal for a complete engine!

Now, if you guys can get me a 02/03 titanium decklid....
I was looking at TPG website and there is a ton of stuff I want :lol:

i would have already offered you my trunklid, but unfortunately i had to buy some stuff for my moms car and that took the money i was going to buy the other stuff with.

Doppelgänger
01-16-2009, 06:43 PM
The motor is a direct bolt-in affair. There have a been a coupld of people who have done a "stock" MSM swap into NAs, IIRC "SunlessInSeattle" on miata.net did it. Might want to go read some of his posts.

wonton
01-16-2009, 06:46 PM
whats the actual tpg website url?

redrumracer
01-17-2009, 02:21 AM
what is the shipping on this(30627) and would it be worth swapping into my current car(99) or just rebuild the motor i have?

jeff m
01-17-2009, 08:33 AM
It's way, way more than just a swap. New ECU, wiring harness, intercooler, intercooler piping, fuel pump and a lot of other misc things....

simontibbett
01-17-2009, 09:19 AM
It's way, way more than just a swap. New ECU, wiring harness, intercooler, intercooler piping, fuel pump and a lot of other misc things....

Well yeah I know that but I was asking mainly if the motor goes in easily. As for all that that's easy stuff.

ben91
01-17-2009, 10:03 AM
It's way, way more than just a swap. New ECU, wiring harness, intercooler, intercooler piping, fuel pump and a lot of other misc things....
There's no reason to swap in any of the MSM electronics. Besides, the stock EM kind of sucks. :lol:

PartsGroup
01-17-2009, 11:08 AM
The moor is a direct bolt in but I agree w/ Ben that you do not need to us the mazdaspeed electronic's. The PartsGroup url is www.PartsGroup.com .

Jack-MX5ATLanta.com
01-17-2009, 11:28 AM
tneel we're going to need to talk. The classifieds section here is intended for private sales. Businesses are required to sign up for a vendor account so you can take full advantage of the place. I'll send you some information.

I also need to make it clearer and actually post that up, haven't got round to it seen as we've only recently become the size where people are becoming aware of us. So I'm not blaming you for being unaware :)

jeff m
01-17-2009, 02:56 PM
There's no reason to swap in any of the MSM electronics. Besides, the stock EM kind of sucks. :lol:

Eh, no reason not too....
But you'll need some aftermarket engine management. But if you're going that route, why waste your time with the OE turbo as well?